Before Welding - Solter OPTIMATIC 100 Manual Del Usuario

INTRODUCTION
Thank you for choosing one of our products. We hope you will find this welding screen highly useful.
This manual contains the necessary safety warnings and precautions for the correct use of this pro-
duct to grant maximum security level for the operator.
SOLTER welding filters must only be used by qualified personnel who knows and understands the
risks entailed in an improper use of the same.
Should any doubt arise regarding this manual, please do not hesitate to contact us.
Modifications to the welding filter can result in serious injury.
Do not make any modifications to either the filter or the rest of the helmet.Modifications should only be
undertaken by qualified technicians.
SOLTER Soldadura, S.L. declines all responsibility arising from the misuse and/or improper operation
of this product. This manual must accompany the model of the filter that you have purchased and must
be saved for future reference.
These filters are designed and certified in full conformity with EN 379 safety standards.
The responsibility for ensuring that this product continues to meet the requirements of the related stan-
dards lies with the people that use and repair it.

BEFORE WELDING

Before using any of the welding filters provided remove the protection film from both sides of the front
lens. Keep the work area clean. Always keep the front lens cover clean. The sensors that cause the fil-
ter to darken are located here.
Before using the screen, check all operating parts and make sure there are no signs of wear or da-
mage. Any part that is damaged should be replaced immediately before use. Test the helmet filter be-
fore each use.
Ensure that the filter is properly fixed to the protection screen in order to avoid it from detaching in the
face of any impact, exposing the user to the risk of personal injury.
In case of DIN adjustable darkening filter, select the appropriate shade before each use. Check the
SHADE GUIDE TABLE on the protection screen's manual.
TECHNICAL SPECIFICATIONS
MODEL
Cartridge Size
Viewing Area
CE
Shade Variable
Power Supply
On / Off
Sensitivity
Delay Time
Operating Temp.
Weight
SOLTER SOLDADURA S.L.
OPTIMATIC 100
110x90x8mm
96x39mm
1/1/1/2
Ajustable (DIN 4/9-13)
Solar Panels and 1
replaceable batt CR 2032
Automatic
Adjustable
(LOW)
(HIGH)
0,1s MIN
1,0s MAX
- 10ºC a + 60ºC
0,8 Kg
OPTIMATIC 55
110x90x8mm
96x39mm
1/1/1/2
Ajustable (DIN 4/9-13)
Solar Panels
Automatic
Adjustable
(LOW)
(HIGH)
0,1s MIN
1,0s MAX
- 10ºC a + 60ºC
0, 75Kg
OPTIMATIC 50
110x90x8mm
91x39mm
1/1/1/2
Fixed (DIN 11)
Solar Panels
Automatic
Manual (Interior)
0,1s SLOW
0,8s FAST
- 10ºC a + 60ºC
0,75 Kg