Protection Level Adjustment - Solter OPTIMATIC 100 Manual Del Usuario

Delay
Adjusts the speed at which the welding filter returns to clear state once the welding process is over.
OPTIMATIC 50 models, the position SLOW the DELAY is 0,1s, and the position FAST the DELAY is
0,8s. For the OPTIMATIC 100 / 55 models the DELAY you can regulate from 0,1s to 1,0s.
Filter functions
For some filters ,two modes of operation can be selected : welding or grinding.
Grinding mode: Used for metal grinding applications. In this mode the shade function is turned off.
The shade is fixed in the light state that all owing a clear view to grind a weld with the helmet providing
face protection.
Before restarting welding, the knob should be set back to the" Weld "position.
Welding mode: Used for most welding applications. In this mode the shade function is turned on.
When it optically senses a welding arc, please select a suitable shade level, delay time and sensitivity
as required.

PROTECTION LEVEL ADJUSTMENT

In case of having a filter with adjustable DIN to fit the degree according to the application of which we
are wanted to protect. To see the following table.
FILTERS SELECTION TABLE ACCORDING TO APPLICATION
CURRENT PLASMA
IN AMPS CUT
0,25
0,5
0,75
1
2,5
5
10
15
20
30
40
60
80
TONE 11
100
125
150
175
200
TONE 12
225
250
275
300
TONE 13
350
400
450
500
SOLTER SOLDADURA S.L.
Grind mode is intended for Grinding not for welding.
COATED MIG
ELECTRO- HEAVY
DES IRONS
TONE 8
TONE 9
TONE 10
TONE 10
TONE 11
TONE 11
TONE 12 TONE 12
TONE 13 TONE 13
TONE 14 TONE 14
MIG
LIGHT TIG
ALLOYS
TONE 8
TONE 9
TONE 10
TONE 11 TONE 9
TONE 12 TONE 10
TONE 11
TONE 13
TONE 12
TONE 13
TONE 14
TONE 14
TONE 15
MAG ARC / AIR
TONE 8
TONE 11 TONE 10
TONE 12 TONE 11
TONE 12
TONE 13
TONE 13
TONE 14
TONE 14
TONE 15 TONE 15
PLASMA
WELD
TONE 2,5
TONE 3
TONE 4
TONE 5
TONE 6
TONE 7
TONE 8
TONE 9
TONE 10
TONE 11
TONE 12
TONE 13
TONE 14
TONE 15