DRAGON WINCH DWM 8000 HD Instrucciones De Uso página 40

4. Connect thin black wire (a') to the bottom terminal
(a) on the underside of the motor.
5. Connect long red power supply wire (B') to the po-
sitive (+) terminal of the battery through the high current
switch, e. g. "disconnecting switch."
6. Connect long black wire (F) (1.8 m) to the bottom
terminal (a) on the motor, and the other end of the wire
to the negative (-) terminal of the battery.
B. CONNeCTION FOR WINCH MODeL: DWM 12 000 HDI
Connection diagram - see section B at the end of the ma-
nual.
1. Wired remote control and wireless remote control
system are properly connected and do not require user in-
tervention.
2. The set includes 2 electrical wires (red A and black
B) to connect the winch to the vehicle's electrical sy-
stem.
3. Connect a red wire (fixed on one end in the relay
box) to the positive (+) terminal of the battery through the
high current switch, e. g. "disconnecting switch."
4. Connect one end of the B black wire (supplied sepa-
rately with the winch set) to the terminal located in the
lower part of the winch motor and the other end to the
negative (-) terminal of the battery.
C. CONNeCTION FOR WINCH MODeLS:
dwM 8000 hd En
40
dwM 0000 hd
dwM 000 hd En
dwM 3000 hd
dwM 3500 hd En
DWT 14000 HD
dwT 5000 hd
dwT 6800 hd
dwT 8000 hd
dwT 0000 hd
dwT 000 hd
dwh 000 hd
dwh 000 hd
dwh 5000 hd
Connection diagram - see section C at the end of the ma-
nual.
1. Wired remote control and wireless remote control
system are properly connected and do not require user in-
tervention.
2. The set includes 2 electrical wires (red A and black
B) to connect the winch to the vehicle's electrical sy-
stem.
3. Connect a red wire (fixed on one end in the relay
box) to the positive (+) terminal of the battery through the
high current switch, e.g. "disconnecting switch."
4. Connect one end of the B black wire (supplied sepa-
rately with the winch set) to the terminal located in the
lower part of the winch motor and the other end to the
www.dragonwinch.com