Great Dane Scamper HG GBD10025 Manual Del Operador página 2

Introduction
Using Your Operator's Manual
This manual is an important part of your machine and
should remain with the machine when you sell it.
An engine manufacturer's owner's manual has been
provided with your machine. This will provide maintenance
and troubleshooting information for the engine installed in
your machine.
Reading your operator's manual will help you and others
avoid personal injury or damage to the machine.
Information given in this manual will provide the operator
with the safest and most effective use of the machine.
Sections in your operator's manual are placed in a specific
order to help you understand all the safety messages and
learn the controls so you can operate this machine safely.
You can also use this manual to answer any specific
operating or servicing questions.
The machine shown in this manual may differ slightly from
your machine, but will be similar enough to help you
understand our instructions.
RIGHT-HAND and LEFT-HAND sides are determined by
facing in the direction the machine will travel when going
forward. When you see a broken line (------), the item
referred to is hidden from view.
Special Messages
Your manual contains special messages to bring attention
to potential safety concerns, machine damage as well as
helpful operating and servicing information. Please read all
the information carefully to avoid injury and machine
damage.
c
CAUTION: Avoid injury! This symbol and text
highlight potential hazards or death to the
operator or bystanders that may occur if the
hazards or procedures are ignored.
IMPORTANT: Avoid damage! This text is used to tell
the operator of actions or conditions that might
result in damage to the machine.
NOTE: General information is given throughout the
manual that may help the operator in the operation or
service of the machine.
Record Identification Numbers
Scamper HG
GDB10025 (15 hp, Recoil, 36-Inch Deck) Serial No.
(TCHR15W010001-
INTRODUCTION
GDB10026 (15 hp, Recoil, 48-Inch Deck) Serial No.
(TCHR15W010001-
GDB10027 (17 hp, Recoil, 48-Inch Deck) Serial No.
(TCHR17W010001-
GDB10028 (17 hp, Electric, 48-Inch Deck) Serial No.
(TCHE17W010001-
GDB10029 (17 hp, Recoil, 52-Inch Deck) Serial No.
(TCHR17W010001-
GDB10030 (17 hp, Electric, 52-Inch Deck) Serial No.
(TCHE17W010001-
If you need to contact an Authorized Service Center for
information on servicing, always provide the product model
and serial numbers.
You will need to locate the model and serial numbers for the
machine and for the engine of your machine and record the
information in the spaces provided below.
DATE OF PURCHASE:
_________________________________________
DEALER NAME:
_________________________________________
DEALER PHONE:
_________________________________________
MODEL NUMBER (A):
__ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __
SERIAL NUMBER (POWER UNIT) (A):
__ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __
ENGINE SERIAL NUMBER (B):
__ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __
ENGINE SPECIFICATION NUMBER (B):
__ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __
Introduction
B
A
MX18836