CARLO GAVAZZI PD140 Manual Del Usuario página 4

Indicators:
Green Led: Indicates power on the receiver, ON@EG>4
(alignment mode)
Yellow Led: Indicates that the sensors can see each other,
(alignment mode disabled).
Indicates sensor alignment signal strength by blinking
(alignment mode enabled).
Connection to the receiver (PD140FNT60Q-02C)
Wire connection: Function:
V+
V-
NC
C
NO
Emitter (PD140FNT60MU-02C)
Green
LED
Sync
Mute
Mute jumper:
This jumper changes the function of the test/mute input.
Position 1: Test function active when mute input is connected to positive
wire (default)
Position 2: Test function active when mute input is connected to negative
wire
Connection to the emitter (PD140FNT60MU-02C)
Wire connection:
V+
V-
MU
4
12-24VAC/DC Supply Class 2.
12-24VAC/DC Supply Class 2.
NC relay output.
COM relay output.
Safe mode
Green indicator:
This indicator shows that the sensor is
supplied and emitting infrared light.
Sync jumper:
The jumper must be enabled (position
2) when using two sets of sensors and
V+
an AC supply. To prevent crosstalk
V-
between the two sensor sets, the supply
cords must be crossed to synchronize
MU
the emitter and receiver sets.
Position 1: Disable sync function
Position 2: Enable sync function
Function:
12-24VAC/DC Supply Class 2
12-24VAC/DC Supply Class 2
Mute/Test input
(default)