Belkin TuneBase Manual Del Usuario página 19

TroUBlesHooTIng
sections
table of contents
Your TuneBase connects firmly to the
power outlet, but it still rotates .
Solution
Check to see if the power outlet rotates in its
socket . If so, please consult your vehicle's
manufacturer .
You cannot insert the cigarette lighter
adapter into the power outlet .
Solution
The cigarette lighter adapter's rubber friction
washer may need to be centered . Follow the
steps below to center the friction washer .
1 . Use pliers to loosen the nut on the front
of the cigarette lighter adapter slightly . It
is not necessary to remove the nut .
2 . Move the friction washer back into
centered position .
3 . Tighten the nut firmly .
TuneBase™ Direct with Hands-Free
1 2
The rubber friction washer remained in
the power outlet when you removed
your TuneBase .
Solution
This is rare, but if it occurs you can remove
the rubber washer from the power outlet and
place it back on the cigarette lighter adapter .
Warning: Disconnect the vehicle's
battery . any attempt to remove the
washer without disconnecting the battery
may result in physical harm to you or
damage to the vehicle .
Use pliers to carefully remove the friction
washer from the power outlet . Place the
friction washer back on the cigarette lighter
adapter . Then, reconnect the vehicle's
battery .
EN-17
3 4 5 6