Regulating The Air Flow; Clock Programming; Timer Programming - Ferroli GOLD INVERTER Manual De Instrucciones

AUTO MODE OPERATING
During the AUTO function, the unit selects automatically HEATING, DRY, FAN, COOLING depending on the room tem-
perature at the time the selection takes place.
To start the AUTO mode:
First switch on the air conditioner and then select the AUTO operation by the MODE key.
The automatic operating mode selection and temperature are determined by the indoor temperature, according the following table:
Indoor temperature
Less than 22°C
21 - 24°C
More than 26°C
Note:
- In feel mode no temperature will be displayed.
- It may occur that no air is expelled from the unit while it is in operation.
- The unit will not always start operating immediately after the mode has been changed.

REGULATING THE AIR FLOW

When the appliance is powered, the baffle will set at a preset angle.
Press the " " key (Fig. 1) to regulate the flow of air issued by the interior unit.
Press the key once and the baffle will continue to move, mixing the ambient air.
Press the " " key a second time and the baffle will lock.

CLOCK PROGRAMMING

The time adjustment must be made when the batteries are inserted.
The remote control displays the adjustment and the clock face flashes (Fig.2) until
the new time has been entered.
The time setting is regulated with keys + e -
- press the keys once to increase/decrease the time setting by 1 minute
- press the keys for one and a half seconds to increase/decrease the time setting
by 10 minutes

TIMER PROGRAMMING

-The TIMER ON and TIMER OFF ( Fig.3) keys can be used to select two time set-
tings, the first for when the air conditioner comes on and the second for when it
switches off.
Proceed in the following way to program the time settings.
1-Press the TIMER ON key once to select the time when the air conditioner
comes on.
The time setting is regulated with keys + e -
- press the keys once to increase/decrease the time setting by 1 minute
- press the keys for one and a half seconds to increase/decrease the time setting
by 10 minutes
- press the keys for a longer time to increase/decrease the time setting by 60 minutes
Press the TIMER ON key again to confirm the time setting.
Press the TIMER ON key a third time to cancel the setting.
2-Press the TIMER OFF key once to select the time at which the air conditioner
must switch off.
The time setting is regulated with keys + e - :
- press the keys once to increase/decrease the time setting by 1 minute
- press the keys for one and a half seconds to increase/decrease the time setting
by 10 minutes
- press the keys for a longer time to increase/decrease the time setting by 60
minutes
Press the TIMER OFF key again to confirm the time setting.
Press the TIMER OFF key a third time to cancel the setting.
STARTING
Operating mode
HEATING
FAN
COOLING
:
:
Desired temperature
20°C
/
25°C
AUTO
FAN
23
12 00
ON/OFF
FAN
CLOCK
AUTO
FAN
AUTO
BLOW TEMP
FAN
OPER
23
23 TURBO SLEEP
°F
°C
:
12 30
:
ON-OFF 12 00
ON/OFF MODE
ON/OFF MODE
FAN
CLOCK TIMER ON
AUTO
BLOW TEMP FAN TIMER OFF
OPER
FAN
TURBO SLEEP LIGHT
23
CLOCK TIMER ON
BLOW TEMP
: :
12 30 12 30
ON-OFF ON-OFF
TURBO SLEEP
OPER
°F
°C
Fig.1
:
MODE
Fig.2
TIMER ON
OPER
TIMER OFF
°F
LIGHT
°C
Fig.3
°F
°C
TIMER OFF
LIGHT
9