CLEANING THE FILTERS OF THE WALL MODELS UNIT
The air filter must be checked and cleaned periodically to make sure that the
appliance operates correctly. Proceed in the following way (Fig. 1):
1. Unplug the machine from the mains power socket.
2. Lift the front panel.
3. Remove the intake grille by pulling it outwards.
4. Remove the filters by pushing the central tabs upwards until they are freed
from the locking device and slide them out by pulling them downwards.
5. Wash them with water or clean with a vacuum cleaner.
6. Re-fit all parts in their original position.
Note: This operation is to be carried out at least once a month (the cleaning
frequency varies according to the characteristics and dust in the room where the
conditioner is used).
CLEANING THE INDOOR UNIT
Proceed as follows to clean the interior unit (Fig. 2):
1. Clean with a damp cloth.
2. Do not use direct jets of water to clean the unit or the electrical components
could be damaged.
3. Never use spirits or other corrosive substances to clean the unit
CLEANING THE OUTDOOR UNIT
• The exterior unit (Fig. 3) must be cleaned periodically and at the beginning of
the season before starting the air conditioner.
• Clean the air intake and outlet gratings, removing any dirt that may obstruct
the free circulation of air, being careful not to damage the fins of the conden-
sing bank.
Note: When cleaning the rear grille be careful not to cut yourself on the fins of
the condensing bank.
ROUTINE MAINTENANCE
Fig.1
Fig.2
Fig.3
11