M e s s a g e s
Listen to voice messages
After you set up voice mail, in the standby mode, press and hold 1; or select
Messaging
>
Voice messages
number. When you connect and the prerecorded greeting begins, follow the
automated instructions to listen to your voice messages.
Automate voice mail
Voice mail services vary by network operator. The following instructions are
examples of common operations. Please check with your network operator for
specific instructions on using your voice mail service.
Write down voice mailbox number and process
1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your interaction with the recorded prompts step-by-step. Keep in
mind that each voice mail service may vary. However, it should look similar to
the following:
Dial 8585551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, and
press #.
Phone numbers with dialing codes
You can insert special characters called dialing codes into phone numbers such
as voice mail, and save the number to a 1-touch dialing location.
Dialing codes instruct the receiving system to pause, wait, bypass, or accept
the numbers that follow them in the dialing string. To set up dialing codes, do
the following:
1. Select
Menu
>
Contacts
2. Scroll to an
(empty)
3. Enter your mailbox phone number, including the area code.
4. Enter any dialing codes as necessary after the entered phone number.
For example, if you pause for 5 seconds after connecting to voice mail, enter p
twice (two times 2.5 seconds) after the voice mailbox number: 2145551212pp.
5. Enter any remaining pauses or other information that enables you to listen to
your messages, and select OK.
6. Enter a name (such as voice mail), and select OK.
To dial and listen to your voice mail, press and hold the assigned 1-touch dialing
key in the standby mode.
36
>
Listen to voice messages
>
1-touch
dialing.
1-touch dialing slot, and select Assign.
Menu
to dial the voice mailbox
>