Activate A Voice Command; Bluetooth Connectivity - Nokia 6165 Manual Del Usuario

S e t t i n g s
4. Select Start, and speak the voice tag clearly into the microphone. Do not
select Quit unless you want to cancel the recording.
The device replays and saves the recorded tag.
with assigned voice tags.

Activate a voice command

After you have associated a voice tag with a function in your device, to issue a
command, speak the voice tag.
1. In the standby mode, press and hold the right selection key or voice key.
2. With Speak now
With the voice tag found, the device displays Found:, and plays the recognized
voice tag through the earpiece. The function you requested is activated.
Options
After you have associated a voice tag to a command, you can select one of the
following options:
Playback—Press the center selection key to listen to the voice command tag.
Change—Select Options
Delete—Select Options
■ Connectivity
You can connect the phone to a compatible device using an infrared (IR)
connection or Bluetooth wireless connectivity. You can also connect the phone
to a compatible PC using IR, Bluetooth connectivity, or a USB data cable; and use
the phone as a modem to enable connectivity from the PC.
For more information, see the Nokia PC Suite online help. Nokia PC Suite and all
related software can be downloaded from the Mobile Phone products section of
www.nokia.com.
Important: Only install and use applications and other software
from sources that offer adequate security and protection against
harmful software.

Bluetooth connectivity

Bluetooth technology enables cost-free wireless connections between electronic
devices and can be used to send and receive images, text, gallery files, voice
recordings, video clips, notes, business cards, and calendar notes. It can also be
used to connect wirelessly to other products that use Bluetooth wireless
technology, such as computers. You can synchronize your phone and your PC
using Bluetooth connectivity.
66
displayed, pronounce the voice tag clearly into the microphone.
> Change to change the voice command.
> Delete to erase the voice command tag.
appears next to commands