Installation Instructions - Koala Kare KB102 Instrucciones De Instalación Y Funcionamiento

INSTALLATION INSTRUCTIONS

KB102 Child Protection Seat (CPS)
Model Number KB102
Step 1.
The Child Protection Seat (CPS) is
designed to be mounted on a bathroom
or fitting room partition. The unit can also
be mounted on a side wall (hardware
not included). Establish proper CPS
placement, taking door swing and
clearance into consideration.
Step 2.
Place the bottom of the unit 2" (51 mm)
above the bottom of the partition or 14"
(356 mm) above the floor, whichever is
higher. Use the CPS as a template for
locating and marking the mounting holes.
Step 3.
After establishing the proper placement of
the four mounting holes, drill through the
partition using a 3/8" (10 mm) drill bit.
Step 4.
Insert the four threaded barrel bolts
(supplied) from the outside of the partition.
Mount the unit using the four ¼" (6 mm)
bolts and washers.
Step 5.
Position Koala sign (supplied) on
the outside of the restroom door.
Replacement parts can be purchased
from your local distributor or by calling toll
free 888.733.3456 or 303.539.8300 in the
U.S.
2