Assembly; Making The Electrical Connection - HAMPTON BAY 91469 Guía De Uso Y Cuidado

Assembly - Hanging the Fan (continued)
2
Hanging the fan
WARNING: The hook (XX) is only to balance the fan while
making the electrical connections. Failure to hang as shown
may result in the hook (XX) breaking, causing the fan to fall.
The hook must pass from the inside to the outside of the
canopy.
WARNING: When hanging the fan on the hook (XX) it is
critical that you use one of the non-slotted (round) holes in
the canopy (C).
□
Carefully lift the fan-motor assembly (D) up to the mounting
bracket (A).
□
Seat the hanger ball portion of the ball/downrod assembly (B)
in the slide-on mounting bracket (A) socket. Ensure that the
tab on the slide-on mounting bracket (A) socket is properly
seated in the groove in the hanger ball. If using close-to-
ceiling mounting, hang the fan on the hook provided by
utilizing one of the holes at the outer rim of the ceiling canopy
(C).
XX
Standard mount.
F
Close to ceiling mount.
D
3

Making the electrical connection

WARNING: Each wire nut supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
□
The fan comes with 54 in. lead wires for use with an extended
ball/downrod assembly. If using the 4.5 in. ball/downrod
assembly (B) provided, you can cut the lead wires to your
desired length (no shorter than 12 in.) This will make extra
room in the canopy (C), if you do not wish to cut the wires,
you will need to neatly wrap them.
□
Connect the fan motor green wires to the household green or
bare wire using a wire connecting nut (AA).
□
Connect the fan motor white wire to the household white wire
using a wire connecting nut (AA).
□
Connect the fan motor black and blue wires to the household
black wire using a wire connecting nut (AA).
□
Secure each wire connecting nut using electrical tape.
□
Turn the wire connecting nut (AA) upward and push the wiring
into the outlet box (RR).
A
B
M
C
D
A
C
M
9
IMPORTANT: Use the wire connecting nuts (AA) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
Black White
Blue & Black White
Please contact 1-855-HD-HAMPTON for further assistance.
Outlet box
in the ceiling
(RR)
Green or bare
Green
AA (x3)
HAMPTONBAY.COM