Operating Instructions
Standard Operation - Temperature Setting/Room Temperature Check
• For air-cooling drive, from 18°C to 30°C, and for heating drive, from 16°C to 30°C, you can select
desired temperature.
• 5°C is proper for the difference between room and outside temperature.
16 Indoor Unit
Temperature Setting
We can simply adjust the desired
1
temperature.
• Press the
desired temperature.
: Increase 1˚C or 2˚F per one time
pressing
: Decrease 1˚C or 2˚F per one time
pressing
• Room temp: Indicate the current room
temperature.
• Set temp: Indicate the temperature that user
want to set.
h Depend on what kind of controller, the desired
temperature can be adjusted at 0.5˚C or 1˚F.
Cooling operation:
- The cooling mode doesn't work if
desired temperature is higher than room
temperature Please lower the desired
temperature.
Heating operation:
- The heating mode doesn't work if desired
temperature is lower than room
temperature Please increase the desired
temperature.
Room Temperature Check
Whenever press
1
temperature will be displayed within 5
seconds.
After 5 seconds, it turns to display the
desired temperature.
Because of location of remote controller,
the real room temperature and the this
displayed value can be different
buttons to adjust the
button, the room