Descargar Imprimir esta página

Sears Craftsman 320.10871 Manual De Usario página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

The purposeof safetysymbolsis to attract y ourattention to possible dangers.
The safetysymbols, a ndtheexplanations w iththem,deserve yourcareful
attention andunderstanding. Thesymbolwarnings DONOTby themselves
eliminate anydangerTheinstructions andwarningstheygiveare nosubstitutes
for properaccident p revention measures
z_ WARNING:
BE SURE to read and understand all safety instructions
in ,,
this ,manual, including
all safety alert symbols such as "DANGER", "WARNING
I and
CAUTION , BEFORE using this saw. Failure to follow all instructions
_
below may result in electric shock fire and/or serious personal
injury,
.
SYMBOL
MEANING
Z_
SAFETY ALERT SYMBOL:
Indicates DANGER, W ARNING, O R
CAUTION, May be used in conjunction
with other symbols
or pictographs,
DANGER: Failure to obey this safety warning WILL result
in death or serious injury to yourself
or to ethers. Always
follow the safety precautions
to reduce the risk of fire,
electric shock and personal
injury.
[ Z_WARNING
]
Failure to obey this safety warning CAN result in death or
serious injury to yourself or to others. Always follow the
safety precautions to reduce the risk of fire, electric shock
and personal injury.
I
_
CAUT_ON
]
Failure
to
obey
this
safety
warning
MAY
result
in
personal
injury to yourself or others or property damage,
Always
follow the safety precautions to reduce the risk of fire,
electric shock and personal
injury.
DAMAGE PREVENTION AND INFORMATION MESSAGES
These inform user of important information and/or instructions that could lead to
equipment or other property damage if not followed. Each message is preceded
by the word "NOTE:" as in the example below:
NOTE: Equipment and/or property damage may result if these instructions
are not followed.
!
I
J
]
WEAR YOUR
z_WARNING:
The operation of any tool with a cimular
blade can result in foreign
objects being thrown into
your eyes, which can result in severe eye damage.
Before beginning
power tool operation, ALWAYS wear
safety goggles or safety glasses with side shield and
a full-face shield when needed. We recommend a Wide
Vision Safety Mask for use over eyeglasses or standard
safety glasses with side shield, available at Sears Stores
or other Craftsman Outlets.

Publicidad

loading