Twin Star Home 28WM426 Instrucciones Para El Montaje página 5

Completed
Assembly
Electric
Fireplace Insert
Mantel/top
G
M
L
Completed
Unit
Install
Insert
From
Back
7.
Locate Mantel/Top (G) and lay finished
side up on top of completed assembly.
From the inside, attach the Mantel using
Bolts (L) and Washers (M) through the
pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
8. Using Phillips head screwdriver tighten
all Bolts alternating top and bottom, left
and right.
9. Remove the two mounting brackets
attached to the back of the Left and
Right Front panels. Set aside with the
wood screws.
PLEASE READ ALL "ELECTRIC
FIREPLACE INSERT"
INSTRUCTIONS PRIOR TO
INSTALLING ELECTRIC INSERT
IN YOUR COMPLETED
FIREPLACE MANTEL. INSTALL
THE INSERT IN YOUR
FIREPLACE CLOSE TO ITS
FINAL POSITION.
10. Lift insert carefully into the back of the
unit and center in the insert opening. Do
not drag insert across Hearth/Base (A) as
it may scratch your unit.
11. Install the mounting brackets to hold
insert flush against the inside of the
mantel front panel.
MOVE YOUR COMPLETED UNIT
ONLY SHORT DISTANCES.
MOVE COMPLETED UNIT WITH
GREAT CARE. IT TAKES TWO
PEOPLE TO MOVE COMPLETED
UNIT INTO ITS FINAL POSITION.
Twin-Star International, Inc.
Delray Beach, FL 33483
In English: 1-866-661-1218
In French: 1-866-374-9203
In Spanish: 1-866-661-1218
Model# 28WM426
Made in China
Printed in China
© 2007, Twin-Star International, Inc.