Sears Craftsman T200 Serie Manual De Instructiones página 28

2. Loosen, but do not remove the flange lock nut on the left idler pulley for 50"
and 54" Decks and the right idler pulley for 42" and 46" Decks. See Figure 33
for 42" Decks, Figure 34 for 46" Decks and Figure 35 for 50" and 54" Decks.
Hex Screw
Hex Screw
SERVICE AND MAINTENANCE
Flange Lock Nut
Figure 33
Flange Lock Nut
Figure 34
3. Carefully remove the belt from around the idler pulleys and the spindle pulleys.
Avoid pinching injuries. Never place your fingers on the idler spring or
between the belt and a pulley while removing the belt.
4. Route the new belt as shown in Figure 36 for 42" Decks, Figure 37 for 46"
Decks and Figure 38 for 50" and 54" Decks.
28
Flange Lock Nut
Figure 35
WARNING
Figure 36