How To Use; Refilling The Tank - Dyson AM10 Instrucciones De Seguridad

How to use

On/off
Airflow
Increase airflow.
1 to 10
Decrease airflow.
10 to 1
Sleep timer
To set the sleep timer, press
and hold the timer button
to select the desired time
(between 15 minutes and
9 hours).
To cancel the sleep timer,
press and hold until two
dashes appear.
10
Fan/ humidity toggle
ON/ OFF switches between
humidifier and fan modes.
Control with airflow and
timer buttons.
Controlling the
humidity manually
Increase target humidity.
30 to 70%
Decrease target humidity.
70 to 30%
The machine will not mist
AUTO
unless the target humidity
setting is above the current
room humidity level.
Automatic Mode
Comfortable humidity is
automatically selected by
the machine.
Humidity percentage
%
A Automatic mode
On/off
Press and hold the power button on
the machine to adjust the humidity
setting.
Blue light indicates that the AM10 is
in humidity mode.
White light indicates that the AM10 is
in fan mode.

Refilling the tank

When animation sequence shows, the tank is empty.
1
Unplug the machine and push the button to unlock.
Lift the loop amplifier away from tank, then tank away
from base.
2
Remove the cap and fill tank (no other part) to the top
with cold tap water. Replace the cap, tank and loop
amplifier. Use the handle for easier handling.
3
Switch 'ON': the water treatment procedure starts.
After 3 minutes the machine will start to humidify.
11