Cleaning - Important - Dyson AM10 Instrucciones De Seguridad

Cleaning –
important!
Cleaning procedures must be routinely followed to ensure that
the humidifier continues to operate efficiently.
Cleaning regimes are designed to help prevent the build up
of scale within the machine, which will be more prominent in
hard water areas.
Failure to adhere to the cleaning regimes may invalidate the
warranty.
Make your own cleaning solution
+ =
1oz of citric 1 liter of Cleaning
acid water solution
Other cleaning solutions are available. Please check these
are suitable for use with plastics and then use in accordance
with manufacturer's instructions. Examples of other suitable
cleaning materials are descalers, foam soaps without an
antibacterial agent, and vinegar.
Some cleaning chemicals are harmful to the machine and
should not be used. Use of these may invalidate your warranty.
Do not use: Alcohol and strong acid mixes, solvent (acetone)
and oil based products, alkali bleach mixes, air fresheners,
aroma oils, scented oils, hot water, brushes, abrasive materials,
etc. Please do not put in a dishwasher or close to a fire.
12
Once a week
Turn the machine into standby mode/'OFF'.
Unplug from the mains electricity supply.
1
Wipe over air loop amplifier, paying close
attention to the air gaps. Wipe with a lint-free
microfiber cloth.
2
Empty the water. Rinse and wipe over all surfaces.
Repeat if necessary.
3
Empty the trough and wipe over all surfaces. Small
spillages may occur. Do not rinse under the tap or put in
the dishwasher. While not dangerous, care should be taken
to avoid water entering the inlets. Wipe the exterior with a
lint free microfiber cloth.
13