Operating Instructions - Task Force 0008862 Manual Del Usuario

Engine shipped without oil. Before starting engine,
fill with oil provided. If you start the engine
without oil, the engine will be damaged beyond
repair and will not be covered under warranty.

OPERATING INSTRUCTIONS

Compare the illustrations with your unit to familiarize yourself with the location of
various controls and adjustments. Save this manual for future reference.
Spray
Gun
High
Pressure
Hose
Multi-Adjustable
Spray Wand
BASIC ELEMENTS OF A
PRESSURE WASHER
High Pressure Pump: Increases the
pressure of the water supply.
Engine: Drives the high pressure
pump.
High Pressure Hose: Carries the pres-
surized water from the pump to the
gun and spray wand.
NOTE: The pump on this unit is
maintenance free and requires no oil.
If there is a problem with the pump
contact an Authorized Service Center.
Spray Gun: Connects with spray wand
to control water flow rate, direction,
and pressure.
Multi-Adjustable Spray Wand: Allows
the user to use high or low pressure and
adjusts from a pencil stream (0°) to a wide
angle fan spray (40°). See How To Use Wand
instructions in this section.
Chemical Hose (not shown): Feeds
cleaning agents into the pump to mix
with the water. See How To Apply
Chemicals/Cleaning Solvents instruc-
tions in this section.
17
Engine
High Pressure Pump