PRESIDENT RANDY FCC Manual Del Usuario página 11

3) CHANNEL SELECTOR: t/s keys
- Press the t (3) button to decrease a channel.
- Press the s (3) button to increase a channel.
A «beep» sounds each time the channel changes, if the KEY BEEP
function is activated. See § KEY BEEP page 17.
4) ~ MENU
(short press)
- Turn on the unit.
- Short press the
- Quickly press the s or t key (3) to select between the 4 possible
lights :
- Short press the
MENU
(long press)
1. Long press the MENU key (4) to enter the MENU.
the display.
2.
Press the s or t key (3) to select the menu to be set.
3. Short press the MENU key (4) to validate the selected menu. The
parameter of the menu blinks.
4.
Press the s or t key (3) to change the parameter.
5. Press the MENU key (4). A short press to validate and stay in the
MENU or a long press to validate and exit the MENU.
6. If no key is pressed, the unit exits the MENU after 10 seconds
without saving the modifications.
See § MENU SETTING page 16.
5) SCAN ~ DW
SCAN
(short press)
Short press the SCAN key (5) to activate the SCAN function. Press
the s key (3) to scan in increasing order. Press the t key (3) to
scan in decreasing order.
The scanning stops as soon as there is a busy channel. The
scanning automatically starts 3 seconds after the end of the
transmission and no key is activated during 3 s. The scan also
restarts in increasing order with the s key (3), or in decreasing
order with the t key (3).
key (4) to switch on the flashlight.
key (4) to switch off the flashlight.
11
appears on