Test Mode; Reset; Factory Reset; System Information - Chauvet Professional NEXT NXT-1 Manual De Usuario

Operation

Test Mode

Reset

Factory Reset

System
Information
-30-
To run an automatic test of all NEXT NXT-1 functions:
1. Press <MENU/ESC> repeatedly to reach the main level of the display menu.
2. Use <UP> or <DOWN> to select Test Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Auto Test.
5. Press <ENTER>.
To manually test any function:
1. Press <MENU/ESC> repeatedly to reach the main level of the display menu.
2. Use <UP> or <DOWN> to select Test Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Manual Test.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select from Pan, Pan Fine, Tilt, Tilt Fine, P/T Speed, Dimmer,
Shutter, Red, Green, Blue, or White.
7. Press <ENTER>.
8. Use <UP> or <DOWN> to increase or decrease the value of that function, from 0–255.
9. Press <ENTER>.
To restart the product without cycling the power:
Press <MENU/ESC> repeatedly to reach the main level of the display menu.
1.
Use <UP> or <DOWN> to select Reset Setup.
2.
Press <ENTER> twice.
3.
To reset the product to factory defaults:
1. Press <MENU/ESC> repeatedly to reach the main level of the display menu.
2. Use <UP> or <DOWN> to select System Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Factory Settings.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select from No (keep current settings) or Yes (reset settings).
7. Press <ENTER>.
After a Factory Reset, the NEXT NXT-1 will be set to Only DMX mode, with the 23-channel
personality and a starting address of 1.
To view information about the product:
1. Press <MENU/ESC> repeatedly to reach the main level of the display menu.
2. Use <UP> or <DOWN> to select Information.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select from
• IP Address (see IP Mode),
• Device ID (unique to each product),
• Temperature (see Temperature Setting),
Fixture Time (the number of hours the product has been powered on),
•
Software Version (shows the currently installed versions of the software on all three
•
CPU boards in the product),
or
• Reset State (if any function fails during the restart process, it will be shown here. No
shows that function reset correctly, Yes shows a failure. If a Yes continues to appear
after restarting the product, contact Chauvet Technical Support).
Press <ENTER>.
5.
NEXT NXT-1 User Manual Rev. 6