System Installation Procedure - Vokkero GUARDIAN EUROPE Standard Guia Del Usuario

VOKKERO GUARDIAN EUROPE Standard & Plus - User Guide V2.0.0
INTRODUCTION
The operations described below allow you to rapidly and easily implement your VOKKERO Guardian communication sys-tem.
All the operations described are valid for all the VOKKERO® Guardian terminals listed below:
ARF8150AA / ARF8152AA / ARF8154AA / ARF8156AA
Note:
Your product reference is given on the label on the back of the terminal housing.
The VOKKERO Guardian system is ready-to-use; it comprises the following three main elements:
EN
Terminals
Configurator/Charger
(Optional) Charger extension (1 to 4 maximum)
All the operating settings of the VOKKERO Guardian system are managed by the configurator which gives access to the Settings menu via a
touchscreen. The configurator must be connected to the power unit (otherwise it will not work) and up to 4 extensions can be associated with
the configurator.

1. SYSTEM INSTALLATION PROCEDURE

• Connect the power unit to the end charger (if several are connected in a row).
• Connect the power unit to the mains.
• Connect the VOKKERO Guardian terminals as shown below.
Note 1: the order and position of the terminals on the charger(s) are irrelevant.
Note 2: if the purpose of the operation is solely to charge terminals, then the configurator is not required.
The first configurator slot (i.e., closest to the LCD) is of importance to the system-configuration process; for more details, refer to §3.4.
Vokkero®
Guardian Terminal
Vokkero® Guardian extension
Vokkero® Guardian configurator
42 / 122