VOKKERO GUARDIAN EUROPE Standard & Plus - User Guide V2.0.0
3.4. Terminal operation
3.4.1.
Volume
Adjust the terminal volume with the Volume trigger button.
•
Push the trigger upwards to increase the volume
•
Push the trigger downwards to decrease the volume
The volume can be adjusted in a range from 0 to 10
When you increase or decrease the volume, you will hear a beep.
When you reach the maximum or minimum volume setting, you will hear 2 consecutive beeps.
The volume setting is also indicated on the terminal LCD.
3.4.2.
Channel (mode activated by default)
Adjust the terminal's communication channel with the Channel trigger button.
•
Push the trigger upwards to increase the channel number
•
Push the trigger downwards to decrease the channel number
The channels available on the terminal depend on the terminal version; for more information,
refer to the channels table (document annex).
When you change channel, you will hear a beep.
When you reach the top or bottom channel, you will hear 2 consecutive beeps.
The selected channel is also indicated on the terminal LCD.
3.4.3.
Group (accessible by configuration)
To change groups, you must also use the Channel trigger button:
•
Push the trigger up to increase the group number
•
Push the trigger down to lower the group number
VOKKERO® Guardian - Standard terminals (References ARF8150AA / ARF8152AA), have 4
groups from 1 to 4 (Gr1 to Gr4).
VOKKERO® Guardian - Plus terminals (References ARF8154AA / ARF8156AA), have 3 groups
from 1 to 3 (Gr1 to Gr3).
Group 0 links all available groups.
Thus, the terminals in groups 1 to 4 can only hear and speak with the members of their group.
Group 0 terminals (Gr0) can hear and speak with all groups.
When you change groups, a beep in the accessory's loudspeaker signals that the terminal has
taken the change of group into account.
A double beep signals that you have reached the upper or lower limit.
Check the number of the selected group on the terminal's LCD.
EN
47 / 122