PEUGEOT 9671. ZK Instrucciones De Montaje página 4

GB
MAKE CONNECTIONS BY MEANS OF SOLDERED SPLICES
BLACK WIRE :
RED WIRE:
ORANGE WIRE:
YELLOW WIRES:
WHITE/BLACK WIRE:
WHITE/GREEN WIRE :
PINK WIRE:
2-WAY BROWN connector : LED power supply (5 V)
CONNECTION OF THE SIREN AND HOOD SWITCH:
5-way WHITE connector
BLUE/BLACK WIRE
RED/BLUE WIRE
BLACK WIRE
WHITE/BLUE WIRE
BLUE/YELLOW WIRE
UNWIRED FUNCTIONS:
Channel 4: Ejectable ground
Accessory output (200 mA), ground.
Channel 12:
INSTALLING THE CENTRAL ALARM SYSTEM:
To be installed inside the vehicle.
INSTALLING THE SIREN:
To be installed in the engine compartment away from a source of heat.
INSTALLING THE VOLUMETRIC SENSORS:
Sensors to be installed at the top of the windshield uprights.
INTERCONNECTIONS
Connect to the vehicle ground
Connect to the permanent battery positive wire or fuse box
Connect to the positive wire after the ignition switch, on when
the engine is started
Connect to the turn signal power supply
Connect to the door switch wire
Connect to the trunk switch wire
Connect to the permanent battery positive
Channel 1 (option,output siren HP 1120)
Channel 2 (siren power supply + 12V)
Channel 3 (ground)
Channel 4 (hood switch)
Channel 5 (battery back-up siren ATX 22)
22-way WHITE
connector
(seen from wire side)
12 1
4
11
22