Ferroli TOP FAN PLUS Manual De Instalación página 39

Wiring diagram of advanced mod. economy function, thermostat, heat/cool function and speed selector command
(on machine and wall):
ADVANCED THERMOSTAT
• Installation on machine and wall
• ON/OFF selector
• Summer mode / winter mode / automatic mode selector
• Three speeds / automatic speed selector
• Set point selector
ECOMONY/THERMOSTAT HEAT/COOL FUNCTION - SPEED SELECTOR COMMAND
VERSION ON MACHINE
KEY TO WIRING DIAGRAM
MT = Ground terminal
MO = Main terminal board
CN1 = Motor connector
CN = Control connector
REM = Remote control for function changes (230V voltage rating)
EC = Economy function key
MA = Brown wire
GR = Grey wire
G/V = Yellow/green wire
MRS = Red wire (3rd speed-min.)
MBL = Blue wire (2nd speed-med.)
MNE = Black wire (1st speed-max.)
MBI = White wire (common connection)
VE = Green wire
GI = Yellow wire
TC = Enabling thermostat (opt.)
ST = Seasonal selector
SV = Fan speed selector
ELECTRICAL CONNECTIONS
MV
CV
SB
SA
L-EC = Economy led
L-ON/OFF = ON/OFF led
IG
less than 4.5 kA
CO
K1
TS
VM
ON/OFF= ON/OFF selector
- The dotted lines mark connections that are at the in-
staller's charge. Wire type H05 VV-F 1.5 sq.mm or de-
pending on the installation. See specific norms.
NOTE: Eliminate the jumper between terminals 4-5 to
insert the TC
WALL-MOUNTED VERSION
= Fan motor
= Fan condenser
= Coil probe
= Ambient probe
= Switch at user's charge with breaking capacity of not
= Terminal battery
= Valve/heating element accessory command
= Set point variator
= ON/OFF valve accessory command (opt.)
39