Description Of The Device; Operation; Energy Saving Tips; Using The Cooler - Waeco BordBar TF-08 Instrucciones De Uso

_TF-08.book Seite 14 Freitag, 24. September 2010 4:31 16

Operation

4.1

Description of the device

No. in
fig. 1, page 3
1
2
3
5 Operation
I
Note
Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the "Cleaning and maintenance"
chapter on page 15).
5.1

Energy saving tips

Choose a well ventilated installation location which is protected against di-
rect sunlight.
Allow warm food to cool down first before placing it in the device to keep
cool.
Do not open the cooling device more often than necessary.
Do not leave the shutter open for longer than necessary.
Clean the lid seal regularly.
5.2

Using the cooler

I
Note
Like every cooling device, your cooler must be properly ventilated
so that any heat created can dissipate. Otherwise proper function-
ing cannot be ensured.
➤ Place the cooler on a firm base.
➤ Connect the 12 V connection cable into the cigarette lighter socket or a
12 V socket in the vehicle
✓ The cooler starts cooling the interior.
14
Description
Shoulder strap
Safety belt tabs
Shutter
BordBar TF-08