Pekatherm S30 Instrucciones De Uso página 31

EN
ENGlISh
OPERATING INSTRUCTIONS
1) Plug the product into the mains socket, making sure your mains'
specifications correspond to those of the product stated on the label.
For products with detachable control unit, first connect the power cord
to the product and then to the mains socket. For detachable products,
use only the control unit originally provided with the product.
2) LED indicators will light up and a safety check will start. If everything is
correct the control unit is then automatically set at the level 0 which indicates
that the product is switched off. All LED indicators will go off.
3) Proceed to adjust the temperature among the four available settings by
pushing the button on the control unit. At this point the product is running
normally. The LED indicator corresponding to the temperature setting you
have selected will remain lit. After a few minutes you will be able to perceive
warmth. When using an "S" line heating pad, make sure to have adjusted and
fastened the pad correctly onto a specific part of the body. Check that there
are no creases or folds.
4) To switch off the product proceed to push the button until all the LED
indicators are off (level 0). The heating element remains switched off in this
position. To turn the product on push the button. Remember to unplug the
product from the mains if you do not use it for a considerable period if time.
5) Unplug the product and let it cool down before folding it for storage.
31