Graf one2clean Manual De Instrucciones página 30

4.2.4 Setting-up Holiday Mode
NOTE: Holiday mode results in the reduced operation of the wastewater treatment system. It should only
be applied when no wastewater is introduced into the wastewater treatment system during the selected
time period. Wastewater that passes into the system during the holiday mode period will not be cleaned.
Holiday mode is switched on and off automatically for the data you have entered.
Press , then press the arrow buttons
Press again to release the input of holiday dates:
Start of holiday:
The start of holiday mode is entered in the format YYYY-MM-DD by pressing
the different settings, the
End of holiday:
As with for the start of the holiday, the end of holiday mode is entered in the year, month and day format
YYYY-MM-DD by pressing
Press the button to save the input data for holiday mode and to exit this function.
Pressing returns you to the automatic mode display.
NOTE: If you do not press any buttons for a period of 2 minutes, normal operation will begin automatically
without the date that you have just entered being saved.
4. Operation of the Control System
until the following appears on the screen:
Vacation oper.
Start: YYYY-MM-DD
End: YYYY-MM-DD
button must be pressed in each case.
.
28 / 57
. To switch between