mspa ELITE Serie El Manual Del Propietario página 24

PROBLEM
BUBBLE AIR
BLOWER DOES
NOT WORK
OZONATOR
FAILURE
FILTER PUMP
DOES NOT WORK
JET FUNCTION
FAILURE
SPA TUB IN AN
ABNORMAL
SHAPE
SPA LEAKING
CAUSE
Auto-off 10 minutes
Unidirectional threshold is not open
Control panel failure
Inflation knob is in <ON> position
Water level is below the minimum
water line
One-way valve blocked
Filter pump does not work
Filter stuck by dirt or other objects
Filter system failure
Water level is not at the minimum
water line
Water inlet blocked
Filter pump does not work
Extra air pressure by strong
sunlight
securely tight
Drainage valve is not closed
completely
Water leaks from the spa pool body
Wait for 10 minutes
Contact the MSpa Service Center
Contact the MSpa Service Center
Turn the knob to <OFF> position and turn
on the bubble button again.
Add water above the minimum line
Contact the MSpa Service Center
section
Clean or replace the filter cartridge
Contact the MSpa Service Center
Add more water to the minimum line
Clean the the inlets of filter pump & jet pump
section
Check the air pressure and release some air
if necessary.
During hot weather, it is recommended to
check if it is necessary to release some air to
avoid any possible damage to the spa pool
Tighten the inlet and outlet connection
Close the drainage valve. Contact the MSpa
Service Center, if spa is still leaking
kit material
24
SOLUTION