The Lcd Display - LG DLEXOOOITM Guia Del Usario E Instrucciones De Instalacion

Secadora con vapor
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

HOW TO USE
THE LCD DISPLAY
The display shows the settings, estimated time remaining, options, and status messages for your
dryer. When the dryer is turned on, the light in the display will illuminate.
]IcnI'D'0CK] IAD
NORMAL
NORMAL MEDIUM
0
HIGH
I
O1 STATUS/CYCLE
DISPLAY
This portion of the display shows the
selected cycle, operating status, and special
messages. If a cycle has special instructions,
they will also be displayed in this area.
O1 ESTIMATED
TIME REMAINING
When the START/PAUSE button is pressed,
the dryer will display the estimated (SENSOR
DRY) or set time (TIME DRY) remaining, and
begin tumbling.
NOTE: The cycle time on SENSOR
DRY cycles may fluctuate as the dryer
recalculates drying time for optimal results.
_I
CYCLE SETTING INDICATORS
These
indicators
show
the
current
cycle
settings for DRY LEVEL, TEMP. CONTROL,
TIME DRY, and BEEPER. To change
these
settings,
press
the
appropriate
settings
button.
CYCLE COMPLETION
INDICATOR
Shows how much of the current drying cycle
has been completed.
O
FLOW SENSE
TM
DUCT BLOCKAGE
SENSING SYSTEM INDICATOR
The FLOW SENSE
TM
duct blockage sensing
system detects and alerts you to blockages
in the ductwork that reduce exhaust flow
from the dryer. This improves operating
efficiency and helps minimize service calls,
saving you money.
CHILD LOCK INDICATOR
When CHILD LOCK is set, the Child Lock
indicator will appear and all buttons are
disabled except the ON/OFF button. This
prevents children from changing settings
while the dryer is operating.
ADD WATER INDICATOR
If the steam feeder is lack for water, this
error may be displayed. Fill the feeder and
restart the cycle.
_1 LINT FILTER INDICATOR
The dryer automatically
detects reduced
air flow caused by a full lint filter. The LINT
FILTER indicator will light before each load
as a reminder to check the lint filter before
starting each load. If the lint filter becomes
clogged during a load, the indicator will
come on to let you know that the filter
should be cleaned immediately for maximum
efficiency. Always clean the lint filter before
every cycle.
CYCLE OPTION
INDICATOR
These indicators show the cycle options for
ANTI BACTERIAL, DAMP DRY BEEP, and
WRINKLE CARE. For detailed information
about the individual options, please see the
following pages.

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Dlgx0002tm

Tabla de contenido