Boubleshooting - LG DLEXOOOITM Guia Del Usario E Instrucciones De Instalacion

BOUBLESHOOTING
BEFORE CALLING FOR SERVICE
(cont.)
Steam doesn't • Water level error. • Unplug dryer and call for service.
generate but no error
code is shown.
Garments still • Too many or too different • Small loads of 1 to 5 items work best.
wrinkled after types of garments in dryer. • Load fewer garments. Load similar-type garments.
STEAM FRESH
TM.
There are no creases • The function of this cycle • Use an iron to make creases.
left on garment after is to remove wrinkles from
STEAM FRESH
TM.
fabric.
Garments have • This is normal. • Depends on individual moisture level in skin.
static after REDUCE
STATIC.
Garments are too • Correct drying options not • Select load weight manually before starting
damp or too dry after selected. REDUCE STATIC option.
REDUCE STATIC.
Garments are not • This is normal. • Depends on the amount or type of garments.
uniformly damp after
EASY IRON.
Water drips from door • This is normal. • This is steam condensation on door surface.
during EASY IRON.
Steam is not visible • This is normal. • Steam vapor is difficult to see when the door is
during Steam Cycle. closed.
Drum does not turn • This is normal. • The drum is turned off so that the steam vapor
during Steam Cycle. remains in the drum.
Cannot see steam • This is normal. • Steam is released at different stages of the cycle
vapor at the for each option.
beginning of cycle.
The display shows • MORE TIME button pressed. • Pressing the MORE TIME button several times will
BULKY LOAD. set the cycle for a large load such as a comforter.
Odors remain in • STEAM FRESH 'Mdid not • Fabrics containing strong odors should be
clothing after remove odor completely, washed in a normal cycle.
STEAM FRESH
TM.
• Install a shorter or straighter duct run. See the
Installation Instructions.
2 bars are displayed
in FLOW CHECK
indicator
4 bars are displayed
in FLOW CHECK
indicator
• Ductwork is slightly too
long or has too many
turns/restrictions.
• Partial blockage of the
ductwork due to lint buildup.
• Ductwork is too long or has
too many turns/restrictions.
• Significant blockage of the
ductwork due to lint buildup
or debris.
• Ductwork should be checked/cleaned soon.
Dryer can be used in this condition, but drying
times may be longer.
Install a shorter or straighter duct run. See the
Installation Instructions.
Ductwork should be checked/cleaned immediately
to remove lint buildup and other blockages. Dryer
can be used, but performance and efficiency will be
greatly reduced.