Start Time; Refreshing The Screen - JVC GM-V42PCE Manual De Instrucciones

START TIME

You can adjust the time to activate the function.
• Set the hour and minute following steps 4 to 6 in
"Setting the Clock" (page 28).
END SET
You can activate/deactivate the Color-Reverse Off Timer.
• Press 2/3 to select "ON" or "OFF."
ON: The function is automatically deactivated at the
time set in "END TIME."
OFF: The Color-Reverse Off Timer is deactivated.
END TIME
You can adjust the time to deactivate the function.
• Set the hour and minute following steps 4 to 6 in
"Setting the Clock" (page 28).
4
Press MENU/EXIT (or MENU on the
Monitor) repeatedly to exit from the
menu operations.
To cancel the Color-Reverse function immediately
1 3
Repeat steps to , then select "OFF" in "COLOR-REVERSE"
by pressing 2/3.

Refreshing the Screen

After the power is turned off, a whitish image may be left on
the screen. In that case, leave the monitor in a white back state
for a while, and the image will disappear.
You can activate/deactivate the function with the Refresh
On/Off Timer.
1
On the remote control:
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
S E T - U P M E N U
Cursor (3)
S T A T U S D I S P L A Y
C O N T R O L L O C K
R E M O T E S W I T C H
H D S I G N A L M O D E
W H I T E B A L A N C E
T I M E R
A D J U S T :
2
Press 5/∞ to move the cursor (3) to
"REFRESH" (on the second page) then
press 3.
• The Setup Menu consists of two pages. If you keep
pressing 5/∞, you can move to the other page from
the current page.
S E T - U P M E N U
P I X E L S H I F T
P O W E R S A V E
C O L O R - R E V E R S E
R E F R E S H
r e s e t
a l l r e s e t
H O U R M E T E R x 1 0 0 h
M O D E L N A M E
A D J U S T :
1 / 2
:
O F F
: O F F
* 1
: M O D E 1
: 1 0 8 0 i
S E L E C T : E X I T : M E N U
2 / 2
: O F F
: O F F
: 1 2 3
: G M - V 4 2 P C E
S E L E C T : E X I T : M E N U
3
Press 5/∞ to select the item you want
to set and set the item as follows.
REFRESH
You can activate/deactivate the function manually.
• Press 2/3 to select the desired setting.
The function is activated immediately after
ON:
exiting the menu operations.
The function is deactivated.
OFF:
TIMER: Select this when you use the Refresh On/Off
Timer.
Note:
• Set the clock (see page 28) and select "TIMER," before
using the Refresh On/Off Timer.
START SET
You can activate/deactivate the Refresh On Timer.
• Press 2/3 to select "ON" or "OFF."
ON: The function is automatically activated at the
time set in "START TIME."
OFF: The Refresh On Timer is deactivated.
START TIME
You can adjust the time to activate the function.
• Set the hour and minute following steps 4 to 6 in
"Setting the Clock" (page 28).
END SET
You can activate/deactivate the Refresh Off Timer.
• Press 2/3 to select "ON" or "OFF."
ON: The function is automatically deactivated at the
time set in "END TIME."
OFF: The Refresh Off Timer is deactivated.
END TIME
You can adjust the time to deactivate the function.
• Set the hour and minute following steps 4 to 6 on
"Setting the Clock" (page 28).
4
Press MENU/EXIT (or MENU on the
Monitor) repeatedly to exit from the
menu operations.
To cancel the Refresh function immediately
1 3
Repeat steps to , then select "OFF" in "REFRESH" by
pressing 2/3.
31