Publicidad
1
Quick Setup Guide
Safe Boot
JP1 is used to safely reboot the system whenever the system hangs and
you are unable to restart the system.
1. Power-off the system and unplug the power cord.
2. Set JP1 pins 2 and 3 to On. Wait for a few seconds then set JP1 back
to its default setting, pins 1 and 2 On.
3. Plug the power cord and power-on the system. The system will reboot
normally without losing all data stored in the CMOS.
S/PDIF-out Settings
8
1
1
2
3
JP1
1-2 On:
2-3 On:
Default
Safe boot
1
1
JP52
2
3
2-3 On:
1-2 On:
S/PDIF-out via
S/PDIF-out via
ALC850
nForce4
1
2
3
1
2
3
Publicidad
