Functional Description; Product Features; Noise/Vibration Information - stayer BHL112K Manual De Instrucciones

Safety Warnings for Drills and Screw-
driver
f Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
f Use auxiliary handle(s), if supplied with the
tool. Loss of control can cause personal in-
jury.
f Hold power tool by insulated gripping sur-
faces, when performing an operation where
the cutting accessory or fastener may con-
tact hidden wiring. Cutting accessory and
fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live"
and could give the operator an electric
shock.
f Use appropriate detectors to determine if
utility lines are hidden in the work area or
call the local utility company for assistance.
Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can
lead to explosion. Penetrating a water line
causes property damage or may cause an
electric shock.
f Switch off the power tool immediately
when the tool insert jams. Be prepared for
high reaction torque that can cause kick-
back. The tool insert jams when:
— The power tool is subject to overload or
— It becomes wedged in the workpiece.
f Hold the machine with a firm grip.
action torque can briefly occur while driving
in and loosening screws.
f Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
f Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
f Always wait until the machine has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
f Do not open the battery. Danger of short-
circuiting.
Protect the battery against heat, e. g.,
also against continuous sun irradia-
tion and fire. There is danger of explo-
sion.
ENGLISH
12
f In case of damage and improper use of the
battery, vapours may be emitted. Provide
for fresh air and seek medical help in case
of complaints. The vapours can irritate the
respiratory system.
f When the battery is defective, liquid can es-
cape and come into contact with adjacent
components. Check any parts concerned.
Clean such parts or replace them, if required.
f Use the battery only in conjunction with
your Stayer power tool. This measure alone
protects the battery against dangerous over-
load.

Functional Description

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Screwdriver bit
2 Keyless chuck
3 Torque preselection ring
4 Gear selector
High re-
5 Battery
6 "Power Light"
7 Rotational direction switch
8 On/Off switch
9 Battery unlocking button
10 Battery charge-control indicator

Noise/Vibration Information

Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
12
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.