cecotec Conga 7090 Manual De Instrucciones página 23

ENGLISH
App advantages:
Control your robot in an easy and intuitive way.
Activate the cleaning process from any point.
Carry out settings and daily scheduling.
Choose between its different cleaning modes: Auto, Spiral, Edge, Manual, Twice, Restricted
area, Spot, Smart area, Back home or Scrubbing.
View how the robot creates an interactive map as it is cleaning.
Manage rooms smartly through its Room Plan function, which allows you to join, separate or
name rooms. Plus, create and schedule your own cleaning plans by selecting the rooms you
want to clean, the mode and power level.
Check the cleaned surface and the time taken.
Check the cleaning history.
The App supports 5 GHz networks.
*This model is compatible with voice virtual assistants Google Assistant and Alexa
Configuration:
Fig. 24.
Download the Conga 7090 App from App Store or Play Store.
Create an account with your e-mail and a password.
Confirm login.
Add your Conga robot.
Connect to Wi-Fi.
Warnings:
The Wi-Fi name and password cannot exceed 32 bits.
If the network configuration fails to connect, follow the below steps:
Press the power button for 5 seconds, the robot will enter sleeping mode and the Wi-Fi
light indicator will blink fast indicating connection error. Retry connecting the robot again
following the steps in the before section.
If the connection fails again, check if:
a. The robot is too far away from the router.
b. The Wi-Fi password is incorrect.
The following modes can be activated from the App:
Auto mode: Select this mode for the robot fo clean 4x4 m quadrants. Within this space, it
will carry out a first cleaning cycle in Edge mode and then in zigzag motion to complete the
surface. Once it has finished, it will directly return to the charging base.
It can be activated from the App or the remote control.
Note: The robot could leave the room to complete the cleaning cycle in some of the
quadrants. This will not affect the robot's operating, do not worry.
44
7090
Edge mode: Select this mode for the robot to clean along walls and furniture.
It can be activated from the App or the remote control.
Spiral mode: When this mode is selected, the robot will start cleaning in a specific point, by
moving in an outward spiral motion and then returning to the starting point in an inward
spiral motion at maximum power. Then, it will return directly to the charging base.
It can only be activated from the App.
Scrubbing mode: When this mode is activated, the robot moves in a swaying motion,
simulating real scrubbing moves. It starts off cleaning in Edge mode, then in zigzag motion
and finally returns to the charging base taking the straightest way back home.
It can only be activated from the App.
Manual mode: To carry out manual cleaning, use the direction buttons on the remote control
or on the App to take the robot to the specific points where you want it to clean.
It can be activated from the App or the remote control.
Back home mode: Select this mode at any point of any cleaning cycle and during any of the
modes, the robot will automatically return to the charging base.
It can be activated from the robot, the remote control or the App.
Smart Area mode: Once the home's map has been saved, select this mode for the robot to
clean a specific area in zigzag motion. The robot will clean the selected area and then will
return directly to the charging base. You can set more than 1 area at the same time. The robot
will only clean the area selected in the map, therefore it will go to the point and return to the
base without vacuuming.
It can only be activated from the App.
Spot mode: Select this mode if you want to clean thoroughly a specific point in the map,
making the most of the robot's maximum power. The robot will clean a 2x2 m zone in zigzag
motion and then will return directly to the charging base when cleaning is completed. The
robot will only clean the area selected on the map, therefore it will go to the point and return
to the base without vacuuming.
It can only be activated from the App.
Restricted Area mode: Select this mode and delimit in the map specific areas where you do
not want the robot to clean. You can set more than 1 restricted area at the same time on the
map.
It can only be activated from the App.
Twice mode: Use this mode to carry out a deep, thorough cleaning of your home.
It can be combined with Edge, Spiral, Spot or Smart Area modes. The robot will carry out 2 full
cleaning cycles and then will return directly to the charging base.
ENGLISH
45
7090