Suavinex BW060 Manual De Instrucciones página 20

EN: iNSTRuCTiON mANuAL
· CONTENTS
1. iNTRODuCTiON
2. PARTS OF THE BOTTLE WARmER
3. iNSTRuCTiONS FOR uSE
4. CLEANiNg AND mAiNTENANCE
4.1. CLEANiNg THE TANK
4.2. CLEANiNg THE OuTSiDE
5. TROuBLESHOOTiNg
6. TECHNiCAL CHARACTERiSTiCS
1. iNTRODuCTiON
The Suavinex small appliance range assists you in the day-to-day care of your baby, providing innovative
solutions to help you out during your child's first years of life. These appliances are easy to use and clean
and are carefully designed to give you peace of mind and save you time, allowing you to spend more
time with your baby and make the most of your time together.
·BOTTLE WARmER
Heat and defrost your baby's food easily in just a few minutes thanks to the Suavinex bottle warmer. Its
3-mode system allows you to use it with bottles of formula milk, as well as with jars of homogenised
baby food or bottles/bags of breast milk, which need to be heated to a lower temperature due to their
composition.
3 iN 1!
- EXPRESS mODE: FOR FORmuLA miLK
- jAR mODE: FOR BABY FOOD
- gENTLE mODE: FOR BREAST miLK
2. PARTS OF THE BOTTLE WARmER
A. Water tank
36
37
37-40
40-42
E. LED light
41
42
43
44
D. Quantity selector buttons
(80 ml / 150 ml / 270 ml)
B. Mode selector
3. iNSTRuCTiONS FOR uSE
1- Place the bottle warmer on a flat, rigid, stable surface.
2- Fill the tank (A) with water as explained below:
if you are going to heat a
FEEDiNg BOTTLE or jAR
Add the same quantity of water as there is milk
in the bottle (same number of millilitres).
*EXCEPTIoN:
for bottles that are larger than 250 ml, use only 210 ml of water.
EN - 37
F. Power supply cable
C. ON/OFF button
if you are going to heat a
BREAST miLK STORAgE BAg
first place the bag in the bottle
warmer and add water until it
reaches the same level as the milk
in the bag.