Cleaning And Maintenance; Weekly Cleaning - Suavinex BW060 Manual De Instrucciones

HEATiNg TimES
mODE STARTiNg
TEmPERATuRE
room TEmP.
EXPrEss
frIdgE
frIdgE
gENTlE
for boTTlE
frEEzEr
frIdgE
gENTlE
for bAg
frEEzEr
room TEmP.
JAr
frIdgE
frEEzEr

4. CLEANiNg AND mAiNTENANCE

The following recommendations will help you clean
and maintain the bottle warmer properly.
· imPORTANT:
- Switch off the appliance, unplug the power
supply cable and leave it to cool completely before
carrying out any cleaning and/or maintenance
tasks.
- Remove the water from the tank (A) before
performing cleaning and/or maintenance tasks.
≈80ml ≈150ml ≈270ml
2'00'' 2'43'' 3'55''
3'55'' 5'38'' 7'26''
7'00'' 7'20'' 10'50''
uNAvAIlAblE
26'15'' 32'23''
uNAvAIlAblE
3'28'' 6'24''
uNAvAIlAblE
18'12'' 17'44''
uNAvAIlAblE
6'00'' 8'00''
uNAvAIlAblE
10'30'' 13'00''
uNAvAIlAblE
46'00'' 37'00''
4.1. CLEANiNg THE TANK:
DAiLY CLEANiNg:
Wash with soap and water then rinse clean.
Do not use aggressive cleaning products
containing chlorine or its compounds or
scourers.

WEEKLY CLEANiNg:

Due to the salts in water, it is normal for
limescale to form in the tank. Limescale can
build up quite quickly depending on the
hardness of the water and the frequency with
which the bottle warmer is used. Limescale
reduces the bottle warmer's performance
and can prevent it from working properly. The
following recommendations will help avoid this:
1- Fill the tank (A) with tap water.
2- Rinse several times, taking care not to get
the power supply cable (L) wet.
3- Gently clean the heating unit in the middle,
trying to remove any limescale.
4- After pouring out any remaining water, fill the
water tank (A) with a solution consisting of one
part water, one part vinegar and leave it to act
for at least 4 hours.
5- Gently swirl the appliance around for a few
minutes and remove any remaining limescale
with a cloth.
6- Rinse the water tank (A) several times with
EN - 41