Pentair GLOBRITE Manual Del Usuario página 19

SETTING UP GLOBRITE
EASYTOUCH
EasyTouch ® Control System
The following describes how to setup the GloBrite
control system indoor control panel or the EasyTouch control system wireless control
panel. From the EasyTouch control panel you can control the light shows.
To set up a GloBrite light circuit; assign the "Light Circuit Name" to the relay circuit
(example; AUX 3, as "Pool Light") and "Function": assign the name "Pool Light" circuit in
the Circuit Func. menu as a "light" circuit (IntelliBrite). After assigning the circuit name
and function, the light circuit name "Pool Light" can be setup in the CONFIG menu for light
position, color etc.
To assign a Circuit Name go to: MENU > SETTINGS > CIRCUIT NAMES
IntelliFlo
IntelliChlor
Circuit Names
Circuit Func.
1. Press the Up/Down button to select a circuit number 1/18. Press the Up
button two times to select AUX 1 to choose this circuit for a light circuit On/
Off button. The circuit number (1/18) corresponds to its assigned circuit
name.
2. Press the Up/Down button to scroll through the list of preset names. Select
a name such as "Pool Light." AUX 1 has now been assigned the circuit name
"Pool Light."
To assign a Circuit Function go to: MENU > SETTINGS > CIRCUIT FUNC.
Circuit / Func. :
[POOL LIGHT
[INTELLIBRITE ]
Freeze: No
3. Press the Menu button to return to the Settings menu. Press the Down but-
ton to and select "Circuit Func." Press the Right button to access the Circuit
Func. menu.
4. Press the Up/Down button to select the already assigned circuit name "Pool
Light."
5. Press the Right button to view "Circuit Functions" to assign to light circuit
"Pool Light."
6. Press the Up/Down button to select the type of light circuit function to use.
Select "INTELLIBRITE" for the GloBrite light circuit function.
7. Press the Menu button three times to return to the main screen.
Operating the GloBrite lights: The GloBrite
EasyTouch control panel button 1 (auxiliary 1 circuit). To access the Lights menu screen
(special Light Features), press Menu > Lights. The Lights menu settings are: MODES,
COLORS, ALL ON, ALL OFF, SYNC, MAGICSTREAM, CONFIG: From the Modes screen
you can control the color light shows. To access the Modes menu, press Menu > Lights >
Modes. See page 2 for GloBrite color light shows.
®
AND INTELLITOUCH
Circuit Names

Circuit #: 1/18
Circuit : AUX 1
[POOL LIGHT


]

™
WHITE LIGHTS WITH
®
CONTROL SYSTEM
White Light from the EasyTouch
™

]

white light is ready to operate using the
™
GLOBRITE™ White LED Light Installation and User's Guide
15
®