Troubleshooting
1.
After inserting test strip, meter does not turn on.
Reason
Test strip inserted upside
down or backwards
Test strip not fully
inserted
Test strip error
Dead or no battery
Battery in backwards
Meter error
2.
After applying sample, test does not start/meter does not beep
or begin testing.
Reason
Sample drop too small
Sample applied after two
minute shut-off
Problem with test strip
Problem with meter
For assistance, call 1-800-803-6025, Monday - Friday, 8AM-8PM EST.
Action
Remove test strip.
Re-insert correctly.
Remove test strip. Re-insert
test strip fully into meter.
Repeat with new test strip.
Replace battery.
Battery positive ("+")
side must face up.
Call 1-800-803-6025, Monday -
Friday, 8AM-8PM EST.
Action
Repeat test with new test
strip and larger drop.
Repeat test with new
test strip. Apply sample
within 2 minutes of
inserting test strip.
Repeat with new test strip.
Call 1-800-803-6025, Monday -
Friday, 8AM-8PM EST.
45