Hamilton Beach HIR400 Manual De Uso página 9

Troubleshooting
PROBLEM THINGS TO CHECK
Won't • I s the iron plugged in and the outlet working?
heat
• Is the Temperature Control Dial turned to a
Water is • Do not overfill the water tank.
leaking
• I f steam ironing, is Adjustable Steam Dial in
• I f dry ironing, make sure the Adjustable
Won't • Check the water level.
steam
• Is the Adjustable Steam Dial in the STEAM
• Has the iron had enough time to preheat?
Leaves • ALWAYS empty the water tank of the iron
spots
Twisted • I f the iron cord should become twisted,
cord
840159101 EN v02.indd 9 840159101 EN v02.indd 9
Check the outlet by plugging in a lamp.
fabric setting?
a steam position, the Temperature Control
Dial in the steam range and did the iron have
enough time to preheat?
Steam Dial is in the DRY IRON (O) position.
position?
after using. Water left in the tank may discolor
clothing and soleplate.
unplug iron and let cool. Hold iron cord in
the middle of entire length. Let plug and
iron dangle freely until cord uncoils. This
will extend the life of your iron cord.
9
11/28/12 2:54 PM 11/28/12 2:54 PM