Playback (Basic Operation); Important Information; Playing A Blu-Ray Disc Player/Dvd Player; Playing A Portable Player - Denon AVR-391 Manual Del Usuario

Ocultar thumbs Ver también para AVR-391:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Playback (Basic operation)

n Selecting the input source (vpage 17)
n Adjusting the master volume (vpage 17)
n Turning off the sound temporarily (vpage 17)
n Playing a Blu-ray Disc player/DVD player
(vpage 17)
n Playing a portable player (vpage 17)
n Playing an iPod ® (vpage 18)
n Tuning in radio stations (vpage 20)
Selecting a listening mode (Surround mode)
(vpage 21)
Playback (Advanced operation) (vpage 27)

Important information

Before starting playback, make the connections between the different
components and the settings on the receiver.
NOTE
Also refer to the operating instructions of the connected components
when playing them.
Selecting the input source
Press the input source select button
(
,
,
,
,
DVD
BD
TUNER
DOCK
SAT/CBL
z
,
,
) to be played
GAME
V.AUX
TV
back.
The desired input source can be selected
directly.
z For operation with the main unit,
V.AUX/PORTABLE
use
.
Adjusting the master volume
VOL df
Use
to adjust the volume.
n When the "Volume Display" setting
(vpage 33) is "Relative"
GAdjustable rangeH
– – –
–80.5dB – 18.0dB
n When the "Volume Display" setting (vpage 33) is
"Absolute"
GAdjustable rangeH 0.0 – 99.0
• The variable range differs according to the input signal and channel
level setting.
You can also operate via the main unit.
In this case, perform the following
operations.
MASTER VOLUME
Turn
volume.
Turning off the sound temporarily
Press
MUTE
.
,
• The sound is reduced to the level set at "Mute Level" (vpage 33).
• To cancel, press
adjusting the master volume.
to adjust the
MUTE
again. Muting can also be canceled by
Playing a Blu-ray Disc player/DVD
player
The following describes the procedure for playing Blu-ray Disc player/
DVD player.
Prepare for playback.
1
q
Turn on the power of the TV,
subwoofer and player.
w
Change the TV input to the input of
this unit.
e
Load the disc in the player.
Press
to turn on
2
POWER ON
power to the unit.
3
Press
BD
or
DVD
to switch an
input source for a player used for
playback.
Play the component connected to this unit.
4
Make the necessary settings on the player (language setting,
subtitles setting, etc.) beforehand.

Playing a portable player

The following describes the procedure for playing portable player.
Connect the portable player to
1
this unit (vpage 15 "Connecting
a portable player").
2
Press
to turn on
POWER ON
power to the unit.
Press
to switch the input
3
V.AUX
source to "V.AUX".
Play the component connected to this unit.
4
ENGLISH
17

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido