PEUGEOT Micro e-Kick Black Modo De Empleo página 10

EN
Changing the riding program by pressing the brake
You can also change the riding program without the setting tool but by pressing on the brake pedal consecutively.
By pressing the brake four times, the LED lights in the footboard indicate the current setting by blinking in the corresponding number
of LEDs during four seconds.
For example, if you are in setting 2 (standard mode), two LEDs will blink to indicate your scooter is currently in standard mode.
Now you can change the setting by pressing on the brake four times again. Each time you do four taps on the brake, your scooter
will go up one setting.
Please note you must start the consecutive brake pressing within four seconds of the previous one in order to change settings.
For example:
-> 4 press on the brake -> 2 LEDs blink setting -> 2 (standard mode)
-> 4 press on the brake -> 3 LEDs blink setting -> 3 (sport mode)
-> 4 press on the brake -> 1 LED blinks setting -> 1 (eco mode)
-> 4 press on the brake -> 2 LEDs blink setting -> 2 (standard mode)
Pressing the brake only 3 times consecutively switches off the motor support
and the LED lights become dimmer (see below: 'Switching off the motor')
Bluetooth Pairing of your Scooter
You can pair your scooter to your smartphone after downloading the MyPeugeot application available on App Store (iOS) or Google
Play Store.
In order to connect the scooter with your smartphone please activate Bluetooth on your smartphone or tablet, download the ap-
plication and open it on your device.
To pair your scooter, please press the brake four times consecutively (same as to change the riding program). The scooter goes into
pairing mode and searches for Bluetooth devices to pair with. The scooter stays in pairing mode for 30 seconds and should become
visible in the app on your device. You can now click on the scooter icon in the app and the app will indicate if the pairing was success-
ful.
e -Kick uses Bluetooth Low Energy protocol to communicate with a smartphone.
18