Rapid Deflation During Measurement - Henry Schein 9008181 Instrucciones De Uso

5. There will be a long beep once measurement
is complete. The air in the cuff will quickly de-
flate and the blood pressure reading - pulse
reading will show. The measuring time will
also display in two screens and a reminder to
record the reading will show " " flashing.
6. Press button "M1" or button "M2" to record the
reading in corresponding memory. For example, if button "M2", is
pressed, the display will show as Fig. 7. If the user does not press
button, the reading won't be recorded.
7. If power supply is not switched off and the device is not used, it
will return to standby mode after 3 minutes.
AUTOMATIC INFLATION
There are 4 given levels of inflation pressure for this device:
190mmHg, 230mmHg, 270mmHg and 300mmHg. When 190mmHg
is not enough or movement of arm occurs, the device will automatic-
ally inflate to reasonable pressure level to ensure a successful mea-
surement. It is not a fault.

RAPID DEFLATION DURING MEASUREMENT

If you feel unwell during measurement or want to stop for any reason.
Press the On/Off button. The device will quickly release the air in cuff
and the device will be returned to standby mode.
9