Bibby Scientific Stuart SCF1 Instrucciones De Funcionamiento página 2

English
Chamber
Stop Lever
Spinner
SCF1
Instructions for use
Motor Shaft
Lid
Introduction
Thank you for purchasing this piece of Stuart
equipment. To get the best performance from the
equipment and for your own safety, please read
these instructions carefully before use. Before
discarding the packaging check that all parts are
present and correct.
This equipment is designed to operate under the
following conditions:
For indoor use only

 Use in a well ventilated area
 Ambient temperature range +5ºC to +35ºC
 Atmospheric pressure 70 to 106kPa
 Relative humidity not exceeding 85%
Mains supply fluctuation not exceeding 10%

 Over-voltage category II IEC60364-4-443
 Pollution degree 2
If the equipment is not used in the manner
described in this manual and with accessories
other than those recommended by Stuart, the
protection provided may be impaired and may
cause injury to the user.
Body