Maintenance / Cleaning; Important Safety Information; Compatible Disposal - Vortice SRA Manual De Instrucciones

ENGLISH
Maintenance and cleaning
See Figures 6-9
Operation to be carried out by skilled personnel.
1) Figure 6
Remove the two screws used for fixing the Torretta on the Extension tube (Figure 1, component (B)).

IMPORTANT SAFETY INFORMATION:

never remove the two hinge fixing screws (Figure 1, component (D)).
These should only be removed in the case of Torretta
replacement/disassembly.
CAUTION: The Torretta is now fixed to the hinge and is free to rotate.
2) Figure 7
Handle the (heavy) Product with care, slowly tiling the Torretta to the end stop of the bracket. We
recommend employing two operators to perform this operation. It is now possible to perform
maintenance and cleaning operations on the duct and on the Torretta. See the Torretta Instructions
Manual for details related to product maintenance.
3) Figures 8 and 9
Once Maintenance and Cleaning operations have been completed, correctly close the Torretta back
up and tighten the Extension tube fixing screws (Figure 1, component (D)), tightening to the torque
prescribed in Fig.4.
Important information

compatible disposal

IN CERTAIN EUROPEAN UNION COUNTRIES THIS PRODUCT DOES NOT FALL WITHIN THE
REQUIREMENTS OF THE NATIONAL LAWS IMPLEMENTING DIRECTIVE WEEE, AND IN THESE
COUNTRIES THE PRODUCT IS NOT SUBJECT TO SEPARATE DISPOSAL OPERATIONS AT THE END OF
ITS WORKING LIFE.
This product conforms to EU Directive2002/96/EC.
This appliance bears the symbol of the barred waste bin. This indicates that, at the end of
its useful life, it must not be disposed of as domestic waste, but must be taken to a collection
centre for waste electrical and electronic equipment, or returned to a retailer on purchase of
a replacement.
It is the user's responsibility to dispose of this appliance through the appropriate channels at
the end of its useful life. Failure to do so may incur the penalties established by laws
governing waste disposal.
Proper differential collection, and the subsequent recycling, processing and environmentally compatible disposal
of waste equipment avoids unnecessary damage to the environment and possible related healthrisks, and also
promotes recycling of the materials used in the appliance.
For further information on waste collection and disposal, contact your local waste disposal service, or the shop
from which you purchased the appliance.
Manufacturers and importers fulfil their responsibilities for recycling, processing and environmentally compatible
disposal either directly or by participating in collective systems.
8
concerning the environmentally