Installation Instructions; Before You Begin; Important - GE JVC3300 Manual Del Propietario E Instrucciones De Instalación

Installation
Instructions
"If you have questions, call 800.GE.CARES (800.432.2737) or visit our website at:
GEAppliances.com"

BEFORE YOU BEGIN

Read these instructions completely and
carefully.

IMPORTANT

•
instructions for local inspector's use.
IMPORTANT
•
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these
instructions for future reference.
• Skill level – Installation of this vent hood
requires basic mechanical and electrical
skills.
• Proper installation is the responsibility of the
installer.
• Product failure due to improper installation is
not covered under the Warranty.
CAUTION
TWO PEOPLE ARE
RECOMMENDED FOR PROPER
INSTALLATION.
FOR YOUR SAFETY:
WARNING
Before beginning the installation,
switch power off at service panel and lock the
service disconnecting means to prevent power
from being switched on accidentally. When the
service disconnecting means cannot be locked,
securely fasten a prominent warning device,
such as a tag, to the service panel.
49-80778
— Save these
— Observe all governing
Custom Hood Insert
JVC3300 Hood
WARNING
FIRE, ELECTRIC SHOCK OR INJURY TO
PERSONS, OBSERVE THE FOLLOWING:
A. Installation work and electrical wiring
must be done by qualified person(s) in
accordance with all applicable codes and
standards, including fire-rated construction.
B. Sufficient air is needed for proper
combustion and exhausting of gases
through the flue (chimney) of fuel burning
equipment to prevent back drafting. Follow
the heating equipment manufacturer's
guidelines and safety standards such
as those published by the National Fire
Protection Association (NFPA), the
American Society for Heating, Refrigeration
and Air Conditioning Engineers (ASHRAE)
and the local code authorities.
C. When cutting or drilling into wall or ceiling,
do not damage electrical wiring and other
hidden utilities.
D. Ducted fans must always be vented to the
outdoors.
E. Turn off breaker to adjacent rooms while
working.
WARNING
FIRE, USE ONLY METAL DUCT WORK.
TO REDUCE THE RISK OF
TO REDUCE THE RISK OF
9