Set-Up - GMCW RC400 Manual De Instrucciones

6
Drain Tube Cover
Power Switch
Power Cord
Water Supply
NOTICE: The brewer is designed to operate with water pressures from 10 psig up to 100 psig.
quires the use of an external water filter such as Water Filter Kit P/N 250-00034. The filter mounts on the rear sur-
face of the brewer.
Power Supply
WARNING
Disconnect power if the machine functions abnormally and notify qualified service personnel for repairs. Do not per-
mit non-qualified service personnel to attempt repairs.
No user serviceable components inside the brewer. Do not disassemble brewer.
Notice
This appliance is equipped with a three wire power cord. A dedicated three wire 120V, 15A NEMA 5-15 electrical
circuit must be used.
1. A dedicated 120 VAC, 60 Hz, 15 Amp, type 5-15, electrical circuit
2. Always unplug machine before servicing or maintaining the machine.
3. Place power switch in OFF position and plug power cord into the dedicated three wire 120V, 15A NEMA 5-
15 electrical circuit

Set-Up

Priming the internal heating tank
NOTE: The brewer will not operate until the tank is primed.
Please follow these procedures to ensure proper installation.
ENGLISH
Water and Power Inlets
Grommet
Water Inlet
Adapter (Auto-Fill ONLY)
Valve Cap (Pour Over ONLY)
Grindmaster re-
is required for proper operation.
6