Nilfisk POWER ECO Instrucciones De Manejo página 7

Change of dust bag and fi lters
The size and quality of the dust bag
and fi lters affect the effi ciency of the
vacuum cleaner. Use of non-original
dust bags or non-original fi lters can
cause restricted air fl ow which may
lead to machine overload. Use of
accessories other than Nilfi sk original
dust bags and Nilfi sk original fi lters will
void the guarantee.
Changing the dust bag
B
The fi ll level idicator of
dust bag. When indicator
is completly red the dust
bag must be changed in
order to prevent motor
damage.
Always use original dust bags from
Nilfi sk.
1. Release the hose connection from
the suction inlet by pressing the
locking mechanism and then
remove it.
2. Open the lid to the dust container
by lifting the opening button in front
of/under the suction inlet.
3. Grip the handle of the dust bag
holder and remove the
holder and the full dust bag
from the dust container.
4. Seal the dust bag by pulling the
cardboard fl ap.
5. Remove the full dust bag from the
dust bag holder.
6. Insert the new dust bag by guiding
the cardboard into the slots of the
bag holder.
7. Insert the dust bag holder with new
dust bag into the dust bag
conainer. Check that the dust bag
is fully opened in the dust
container.
8. Close the lid of the dust container.
9. Insert the hose connection into the
suction inlet and press until the
hose engages with a click.
C Changing the prefi lter
The prefi lter protects the motor by
absorbing micro-particles that arn't
captured by the dust bag. Change the
prefi lter with every fourth dust bag.
The prefi lter is located behind the dust
bag. Always use original fi lters from
Nilfi sk.
1. Release the hose connection from
the suction inlet by pressing the
locking mechanism and then
remove it.
2. Open the lid to the dust container
by lifting the opening button in front
of/under the suction inlet.
3. Grip the handle of the dust bag
holder and remove the
holder and the full dust bag
from the dust container.
4. Seal the dust bag by pulling the
cardboard fl ap.
5. Take out the fi lter holder with
prefi lter.
6. Open the fi lter holder.
7. Remowe the used prefi lter.
8. Fit the new prefi lter and close the
fi lter holder. Check that the prefi lter
is correctly fi tted in the holder.
9. Place the fi lter holder in position
and press into place.
10. Insert the dust bag holder with new
dust bag into the dust bag
conainer. Check that the dust bag
is fully opened in the dust
container.
11. Close the lid of the dust container.
12. Insert the hose connection into the
suction inlet and press until the
hose engages with a click.
E
n
g
l
i
s
h
4