Nilfisk POWER ECO Instrucciones De Manejo página 8

E
Changing the exhaust fi lter
D
The exhaust fi lter is on some variants
n
of HEPA type ( High Effi ciency Particu-
g
late Air fi lter) model.The fi lter cleans
l
exhaust air from micro particles that
are not not captured by the vacuum
i
bag and prefi lter. The HEPA fi lter or
s
the exhaust fi lter can not be brushed
or washed clean. Change the fi lter at
h
least once per year. Always use
original HEPA fi lters and exhaust
fi lters from Nilfi sk.
1. Release the lid on the back of the
vacuum cleaner. This is done by
pressing the locking button
upwards. Remove the lid from the
machine.
2. Remove the used HEPA fi lter.
3. Insert the new HEPA fi lter.
Do not touch the surface of the
fi lter. Handle using the plastic
frame that surrounds the fi lter.
Check that the HEPA
fi lter is installed correctly.
4. Replace the lid on the machine.
This is done by inserting the fl aps
on the top of the lid in the cor-
responding notches on the
machine.
5. Then press the lower edge
of the lid so the lock closes the lid.
5
E
Adjust the suction power
Suction power is controlled using the
sliding valve on the hose handle.
Suction power is maximal when the
sliding valve is closed and minimal
when open. Adjust the suction power
by moving the sliding valve in
appropriate position.
Suction power is also adjusted using
the slide control on top of the vacuum
cleaner. The symbol on the control
indicates the direction for maximum
and minimum suction power.