Bell CONSOLE 200 Manual Del Usuario página 13

ADDITIONAL FUNCTION MODES
FREEZE FRAME MEMORY –
At the end of a ride segment you can press the LEFT
button to set Freeze Frame Memory. This function locks the computer saving TM,
DST and AVS which will flash. Info can be read at a later time by pressing the RIGHT
button. To release the memory, press the LEFT button until the display digit is static
again. This is particularly useful when crossing the finish line of a time trial, since the
TM cannot be stopped manually.
ODOMETER SAVE FUNCTION–
The SAVE function allows you to keep the impor-
tant data of total distance (ODO) even after battery replacement. To set ODO, after
battery replacement and wheel size setting, press RIGHT button to ODO mode and
then hold LEFT button for 2 seconds until the last digit flickering. To adjust number,
press the RIGHT button and then press the LEFT button to confirm and select digit to
be input. Repeat this sequence to reach the desired odometer value. Press the LEFT
button again to return to normal ODO mode.
AUTO STOP/START–
To preserve batteries, the cycle computer will automatically
switch off if the unit is left unused for over 5 to 6 minutes. Display will reappear with
a press on any button.